Dilenza provides independent industrial inspection in Belgium for manufacturers, fabrication facilities, equipment suppliers and industrial project sites.
We match welding, coating and industrial inspectors according to your equipment, required qualifications, applicable project requirements, supplier location and schedule.
From one critical manufacturing milestone to recurring, resident or shutdown technical support, Dilenza supports industrial projects throughout Belgium.
ITP · Specification · PO · Drawings accepted
AWS CWI · CSWIP · IWI · AMPP · FROSIO
Single Visit · Recurring · Resident · Shutdown · Multi-Site
Industrial Inspection Coverage Across Belgium
Process Industry · Pressure Equipment · Steel · Rail · Offshore Wind
Highlighted areas represent key industrial clusters, not Dilenza offices. Inspection requirements can be reviewed throughout Belgium.
Qualified welding inspection profiles for pressure equipment, piping, railway equipment, structural steel, machinery and industrial fabrication.
Profiles can be matched according to the materials, welding processes, equipment, applicable requirements and required qualification. For rail and specialized fabrication projects, relevant EN 15085, ISO 3834 or project-specific experience can also form part of inspector selection.
AWS CWI · CSWIP · IWI
Protective coating inspection for tanks, piping, structural steel, process equipment, offshore structures and other industrial assets.
Profiles can be selected according to the asset, coating system, substrate, exposure environment and project specification.
AMPP · FROSIO · BGAS-CSWIP
Independent technical inspection while equipment is being manufactured, fabricated, assembled or tested at a Belgian supplier.
Inspection can follow:
ITP · Hold Points · Witness Points · Manufacturing Milestones · Testing · FAT · Final Verification
Long-term technical presence for projects requiring frequent or continuous inspection over several weeks, months or longer.
Particularly relevant to:
Process Equipment · Major Fabrication · Rail Manufacturing · Energy Projects · Welding Programs · Coating Programs
Belgium combines a compact geography with a highly concentrated industrial base covering petrochemicals, refining, steel, engineering, railway equipment, process systems, offshore energy and advanced manufacturing.
For industrial inspection, some of the strongest opportunities are concentrated around Antwerp, Ghent, the Belgian coast and the Liège–Charleroi industrial corridor.
Belgian suppliers manufacture equipment ranging from pressure systems and process piping to steel structures, rail components, mechanical packages and engineered industrial equipment.
For international buyers, EPC contractors and project owners, however, finding an inspector near the supplier is only part of the requirement.
The technical profile may also need the correct:
Dilenza can support industrial inspection services in Belgium at:
Inspection can cover one defined manufacturing stage or continue throughout a longer fabrication, production or project program.
The agreed scope follows controlled documentation such as:
Inspection & Test Plan · Technical Specification · Purchase Order · Drawings · Client Procedures · Applicable Standards
The supplier defines the location. The equipment defines the expertise.
Process Piping · Skids · Heat Exchangers · Tanks · Valves · Mechanical Packages
Belgium has a major petrochemical and process-industry supply chain, particularly around Antwerp. Inspection can support material verification, welding, traceability, NDT witnessing, dimensional verification, pressure testing and documentation. Requirements can range from one hold point to recurring manufacturing surveillance throughout fabrication.
Pressure Vessels · Heat Exchangers · Boilers · Reactors · Process Skids · Pressure Piping
Inspection can support project-defined stages involving materials, welding, WPS/WPQR documentation, NDT, dimensions, pressure testing and final documentation. Technical profiles can be selected according to the equipment, fabrication process and applicable project requirements.
Steel Structures · Frames · Platforms · Industrial Assemblies · Heavy Welded Components
Belgium maintains a strong steel and metalworking base, particularly around Ghent, Liège and other established industrial regions. Inspection can support material identification, fit-up, welding, dimensions, NDT witnessing, surface treatment and final verification.
Rail Vehicles · Car Bodies · Assemblies · Rail Systems · Fabricated Components
Belgium has an established railway manufacturing and engineering ecosystem. Inspection can support welding, fabrication, assembly, dimensions, testing and documentation. Where applicable, inspector profiles can be selected for projects working under EN 15085 and other controlled railway requirements.
Offshore Components · Heavy Structures · Marine Equipment · Wind-Energy Components
Belgium's North Sea industrial ecosystem creates requirements for fabricated structures and equipment used in offshore-energy projects. Inspection can support structural fabrication, welding, dimensional verification, mechanical systems and protective coatings.
Industrial Machinery · Mechanical Assemblies · Energy Equipment · Engineered Systems
Belgian engineering companies support process, energy, transportation, metals and industrial manufacturing projects. Inspection can be arranged during manufacturing, assembly, dimensional verification, functional testing, FAT and final inspection.
Dilenza can review inspection requirements throughout Belgium according to the supplier location, equipment and technical scope.
Highlighted areas represent key industrial clusters, not Dilenza offices. Inspection requirements can be reviewed throughout Belgium.
Antwerp · Kallo · Lillo · Zwijndrecht
Petrochemicals · Refining · Piping · Pressure Equipment · Tanks
Antwerp is Belgium's strongest process-industry cluster.
The area contains a dense industrial ecosystem covering refining, chemicals, tank storage, terminals, utilities and extensive pipeline infrastructure.
Dilenza can support one manufacturing milestone, recurring supplier inspection or longer technical presence. Shutdown and turnaround support can also be particularly relevant in this region.
Inspection requirements can involve:
Ghent · Zelzate · Sint-Niklaas
Steel · Heavy Industry · Fabrication · Machinery
Ghent is one of Belgium's principal steel and heavy-industry locations.
Projects can range from one supplier visit to recurring technical surveillance during fabrication.
Inspection can support:
Bruges · Zeebrugge
Rail Manufacturing · LNG · Energy · Industrial Equipment
Bruges combines railway manufacturing with access to one of Belgium's major North Sea industrial gateways.
Inspection requirements can involve:
Ostend · Belgian North Sea
Offshore Wind · Marine · Heavy Fabrication · Energy
Ostend is Belgium's principal offshore-wind and marine fabrication base.
Technical support can range from one fabrication milestone to recurring inspection during longer offshore-energy programs.
Inspection can support:
Liège · Seraing · Flémalle
Engineering · Steel · Energy · Process Equipment
Liège has a long-established engineering and industrial base with relevance to energy, metals, machinery and process equipment.
Inspection can support:
Charleroi · Mons · La Louvière
Rail Technology · Machinery · Engineering · Industrial Equipment
Charleroi has particular relevance to rail technology and industrial engineering.
For rail projects, profile matching can include relevant welding, fabrication and railway experience.
Inspection can support:
Genk · Geel · Hasselt & other locations
Manufacturing · Steel Processing · Machinery · Industrial Equipment
Belgium's industrial supply chain extends well beyond the largest port and steel clusters.
Dilenza can review requirements throughout Flanders and Wallonia.
Requirements are reviewed according to:
Dilenza can also review inspection requirements in Genk, Geel, Hasselt, Mechelen, Leuven, Namur, Tournai and other Belgian manufacturing and project locations.
Coverage depends on supplier location, equipment, technical scope, required qualification, schedule and suitable inspector availability.
Industrial inspection depends on more than proximity or certification.
Two inspectors can hold similar qualifications while having very different experience with process piping, pressure vessels, railway structures, heavy steel or offshore components. Dilenza therefore reviews the actual technical requirement before proposing a profile.
Step 01
Step 02
Step 03
Relevant inspector CVs and qualifications can be submitted for technical assessment.
Step 04
The confirmed inspector attends according to the agreed scope and schedule.
Independent vendor inspection in Belgium can provide technical oversight before equipment leaves the supplier.
This is particularly valuable for pressure and process equipment because a final inspection alone may not provide visibility into critical manufacturing stages such as material control, welding, NDT or pressure testing.
Depending on the client's ITP, inspection can follow:
Confirm the applicable technical requirements and inspection stage.
Verify material identification, certification and traceability.
Attend agreed fabrication, welding and assembly activities.
Provide independent technical presence at project-defined milestones.
Witness defined tests or Factory Acceptance Testing when included within the scope.
Complete the agreed inspection before release or shipment.
Vendor inspection can provide visibility into:
For international buyers sourcing engineered equipment from Belgium, this provides independent technical visibility while corrective action is still practical at the supplier. Inspection frequency can range from one critical attendance to recurring manufacturing surveillance or resident technical presence.
Diligence before the equipment leaves the supplier.
Certification alone does not determine technical suitability.
Welding
Protective Coatings
Coating profiles can be reviewed according to the asset, coating system, substrate and service environment, including tanks, piping, structural steel and offshore components.
Profiles can also be matched according to:
Equipment · Materials · Welding Processes · Coating Systems · Process-Industry Experience · Rail Experience · Offshore Experience · Applicable Standards · Assignment Duration
Depending on controlled project documentation:
The applicable standard, edition, acceptance criteria and inspector responsibilities should always come from the project's controlled documentation.
Some equipment manufactured or installed in Belgium may require legally defined conformity assessment, notified-body involvement or another authorized inspection function. This is particularly important for regulated equipment such as pressure systems. Dilenza's ordinary vendor and project inspection services should not be treated as a substitute for statutory inspection, notified-body activity or legally required conformity assessment. The independent purchaser's inspection scope should therefore be distinguished from any regulatory function required under Belgian or European legislation.
One Visit · Recurring · Resident · Shutdown · Multi-Site
One manufacturing milestone, hold point, witness point, FAT, test or final verification.
Repeated technical attendance throughout manufacturing or fabrication.
Frequent or continuous technical presence for longer manufacturing programs.
Additional welding, coating or technical inspection resources for refinery, chemical, steel, energy or other planned industrial maintenance periods.
Inspection coordinated across several Belgian suppliers or manufacturing locations in different countries.
Belgium's compact geography can make multi-site coordination particularly effective when several suppliers contribute to one industrial project, and shutdown support is especially relevant given the concentration of process-industry assets around Antwerp.
Different suppliers. One project requirement.
Yes. Inspection requirements can be reviewed throughout Belgium according to supplier location, technical scope, required qualifications, schedule and suitable inspector availability.
Yes. Welding inspection requirements can be reviewed according to the equipment, materials, welding processes, applicable standards and required qualifications.
Yes. Protective coating inspection can support process equipment, piping, tanks, structural steel, offshore components and other industrial assets.
Yes. Vendor inspection can support manufacturing milestones, ITP hold and witness points, testing, FAT and final verification.
Yes. Antwerp is particularly relevant to petrochemical, refining, pressure-equipment, piping, tank and process-industry projects.
Yes. Inspection can support pressure vessels, process piping, heat exchangers, skids, tanks, valves and other equipment according to controlled project requirements.
Yes. Welding, coating and technical inspection resources can be reviewed for refinery, chemical and process-industry shutdowns according to the required disciplines and schedule.
Yes. Ghent is particularly relevant to steel, heavy industry, fabrication, machinery and industrial-equipment projects.
Yes. Inspection requirements involving rail vehicles, fabricated components, welded structures, assembly and testing can be reviewed according to the project scope.
Yes. Where EN 15085 applies, relevant railway-manufacturing and welding experience can form part of inspector selection.
Yes. Bruges is particularly relevant to railway manufacturing and industrial-equipment projects.
Yes. Requirements involving rail technology, machinery, engineered systems and industrial equipment can be reviewed throughout Charleroi and Hainaut.
Yes. Liège and the Meuse industrial corridor are relevant to engineering, energy equipment, steel processing, machinery and industrial fabrication.
Yes. Inspection can support offshore structures, wind components, heavy fabrication, welding and protective coating requirements.
Yes. Ostend is particularly relevant to offshore wind, marine, heavy-fabrication and energy-project activities.
Yes. Project inspection requirements involving pressure vessels, heat exchangers, boilers, piping, valves and skids can be reviewed according to controlled project documentation. Any separate statutory or conformity-assessment requirement must be identified independently.
Yes. Inspection can support fabricated steel structures, frames, platforms and heavy welded assemblies according to project specifications.
Yes. Resident inspection can support projects requiring frequent or continuous technical presence over several weeks, months or longer.
Yes. Single visits can support one manufacturing milestone, witness point, FAT, test, repair verification or final inspection.
Yes. Required welding qualifications can form part of profile matching together with relevant equipment and project experience.
Yes. Coating profiles can be reviewed according to the required qualification, coating system, service environment and relevant project experience.
Yes. Relevant inspector CVs and qualifications can be submitted for technical review before assignment confirmation.
Tell us what needs to be inspected.
ITP · Specification · PO · Drawings
Not sure which inspector qualification or technical requirement applies? Send us the equipment and project scope and we can review the requirement.
Independent technical inspection for equipment manufacturers, fabrication facilities and industrial projects throughout Belgium.
